IRONGIRDER Bridge

H0 scale IronGirder style bridge for model railways and dioramas.

Setting the length of the bridge

200MM MODULES AND LENGTH OF THE BRIDGE

The bridge is made up of 200mm long modules, which can be joined together to make it longer. This way, the bridge can be 40cm, 60cm, 80cm… long.

For this type of bridge, we have different types of 200mm modules in various shapes that can be combined together to make a variety of bridge structures. This creates the possibility of multiple combinations. You will find a few examples of these below.

If a specific, customised length of a few centimetres is required, the ends can be designed with the specified size to match the desired length of the bridge.

Below you will find the nomenclature for each module, so that it is easy to order a composition.

Setting the height of the bridge

SPECIFYING THE TRACK HEIGHT

To choose the height of the bridge, we first need to know the height where the track goes the height of the Märklin type C or K track plane or similar.

Based on this value, we calculate the height of the bridge pillars. Each pillar is made up of a stone or concrete part, and a part where the iron cushioning structure goes. There are two different types or heights, depending on the structure to be supported, one long and one short.

This bridge, which is designed for a fairly limited height of about 140mm. , can be increased or decreased by modifying the stone pillars, or even adding a few more stone blocks.

For other unspecified heights, we can design them to suit the customer: all we need is a feasibility study and a quote.

The geometry of the bridge varies a little depending on the modules that we apply, so here are some examples of different IronGirder bridges.

Bridge details

FES LA TEVA COMANDA

Ompla el formulari amb la informació que vulguis o necessitis, y nosaltres ens posarem en contacte amb vosaltres per enviar un pressupost, o resoldre qualsevol dubte que tinguin.

Defineix el tipus de pont:

Escriu El nom del pont, juntament amb la longitud i altura que necessiteu, també, si hi ha alguna opció o variació més, especifiqueu el codi corresponent.


info@modelmakers3d.com

PLACE YOUR ORDER

Fill in the form with the information you need or require, and we will contact you by e-mail to resolve any queries.

SETTING THE BRIDGE TYPE:

Write El nom del pont, together with the required length and height, adding the option codes or variations that are activated according to the type of bridge chosen.


info@modelmakers3d.com

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.